Connecting Your Printer to a Wireless LAN (WPS PIN Code) - iB4020

Article ID: ART173500 | Date published: 01/18/2019 | Date last updated: 04/25/2019


This article shows how to start a wireless connection of your MAXIFY iB4020 to a wireless LAN using the WPS PIN code method.



Some wireless routers will allow you to connect devices via a WPS PIN code.  Follow the steps below to begin a wireless connection setup using the WPS PIN code method for the MAXIFY iB4020.
  1. Press the Setup  button.
  2. In the Setup menuWireless LAN setup is the first option.  Press the OK button.

    The printer will search for nearby wireless networks.

  3. Press the right arrow button  until Other setup appears.  Press the OK button.

  4. WPS (PIN code) will be shown on the screen.  Press the OK button.

  5. A PIN code will appear on the screen.

    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.

  6. After the printer has connected, press the OK button.

iB4020 Page


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments