Connecting Your Printer to a Wireless LAN (WPS PIN Code) - G4210

 

Description

This article shows how to start a wireless connection of your PIXMA G4210 to a wireless LAN using the WPS PIN code method.

 

Solution

Some wireless routers will allow you to connect devices via a WPS PIN code.  Follow the steps below to begin a wireless connection setup using the WPS PIN code method for the PIXMA G4210.
  1. Press the Setup  button.
     
  2. In the Setup menuWireless LAN setup is the first option.  Press the OK button.


     
  3. Press the right arrow button  until Other setup appears.  Press the OK button.


     
  4. Press the right arrow button  until WPS (PIN code) is shown on the screen.  Press the OK button.


     
  5. After a few moments, a PIN code will appear on the screen.



    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.


     
  6. After the printer has connected, press the OK button.


PIXMA G4210 Page


 

Doc ID   ART173507
Updated   04/09/2019

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments