Connecting Your Printer to a Wireless LAN (WPS PIN Code) - MX922

Article ID: ART173521 | Date published: 01/21/2019 | Date last updated: 03/05/2019


This article shows how to start a wireless connection of your PIXMA MX922 to a wireless LAN using the WPS PIN code method.



Some wireless routers will allow you to connect devices via a WPS PIN code.  Follow the steps below to begin a wireless connection setup using the WPS PIN code method for the PIXMA MX922.
  1. Press the Menu  button.
  2. Use the arrows to select WLAN setup.  Press the OK button.

    The printer will search for nearby wireless networks.

  3. Use the arrows to select WPS.  Press the OK button.

  4. Use the arrows to select PIN code method.  Press the OK button.

    A PIN code will appear on the screen.

    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.

  5. After the printer has connected, press the OK button.

MX922 Page

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments