Connecting Your Printer to a Wireless LAN (WPS PIN Code) - MG3620

Article ID: ART173526 | Date published: 01/21/2019 | Date last updated: 02/05/2020


This article shows how to start a wireless connection of your PIXMA MG3620 to a wireless LAN using the WPS PIN code method.



To connect your PIXMA MG3620 to a wireless router using the WPS PIN code method, please follow the steps below.
  1. Load two sheets of A4 or Letter-sized plain paper.

  2. Press and hold the Wi-Fi button (A) on the printer until the ON lamp (B) flashes.

  3. Press the Wi-Fi button.

    The wireless connection setting information including the PIN code will be printed.

  4. To prepare the printer for the WPS PIN Code connection, hold down the Stop button (C) on the printer until the Alarm lamp flashes 16 times, then release the Stop button after the sixteenth flash.

  5. Using a computer or mobile device, you will need to access the internal settings of your wireless router to enter the WPS PIN code described on the printed Network Configuration Page. When this code is entered into the router, the printer and router will attempt to establish a connection. Please refer to the documentation for your router for instructions on how to access these settings and enter the WPS PIN code.

  6. Make sure that the Wi-Fi lamp (D) on the printer is lit.


MG3620 / MG3622 Page

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments