Connecting Your Printer to a Wireless LAN (WPS PIN Code) - MG5700 Series

Article ID: ART173530 | Date published: 01/21/2019 | Date last updated: 01/21/2019


This article shows how to start a wireless connection of your PIXMA MG5700 series printer to a wireless LAN using the WPS PIN code method.



To connect your PIXMA MG5700 series printer to a wireless router using the WPS PIN code method, please follow the steps below.
  1. From the HOME screen, use the up or down arrows until WLAN appears on the screen.  Then, press the left Function button under LAN settings.

  2. Use the arrows to select Wireless LAN setup.  Press the OK button.

  3. Use the arrows to select Other setup.  Press the OK button.

  4. Use the arrows to select WPS (PIN code method).  Press the OK button.

    A PIN code will be displayed.

    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.

  5. After the printer has connected to the wireless network, press the OK button.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments