Ask a Question

Connecting Your Printer to a Wireless LAN (WPS PIN Code) - imagePROGRAF PRO-1000

Article ID: ART173538 | Date published: 01/21/2019 | Date last updated: 04/11/2019
 

Description

This article shows how to start a wireless connection of your imagePROGRAF PRO-1000 to a wireless LAN using the WPS PIN code method.

 

Solution

To connect your imagePROGRAF PRO-1000 to a wireless router using the WPS PIN code method, please follow the steps below.
 
  1. From the HOME screen, use the up or down arrows to select LAN settings.  Press the OK button.


     
  2. Select Wireless LAN setup and press the OK button.


     
  3. Use the arrows to select Other setup.  Press the OK button.


     
  4. Use the arrows to select WPS (PIN code method).  Press the OK button.



    A PIN code will be displayed.



    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.


     
  5. After the printer has connected to the wireless network, press the OK button.

PRO-1000 Page


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments