➤
Home
Articles
FAQs
Ask a Question
Search
Models related to this article
imagePROGRAF PRO-1000
Home
Articles
Articles Detail
Connecting Your Printer to a Wireless LAN (WPS PIN Code) - imagePROGRAF PRO-1000
Article ID: ART173538
|
Date published: 01/21/2019
|
Date last updated: 04/11/2019
Description
This article shows how to start a wireless connection of your imagePROGRAF PRO-1000
to a wireless LAN using the WPS PIN code method.
Solution
To connect your imagePROGRAF PRO-1000 to a wireless router using the WPS PIN code method, please follow the steps below.
From the
HOME
screen, use the up or down arrows to select
LAN settings
. Press the
OK
button.
Select
Wireless LAN setup
and press the
OK
button.
Use the arrows to select
Other setup
. Press the
OK
button.
Use the arrows to select
WPS (
PIN code method)
. Press the
OK
button.
A PIN code will be displayed.
The PIN code must be entered into your router. Please refer to your router's documentation for information on how to enter a PIN code from a device.
After the PIN code has been entered into the router, the printer will attempt to connect to the network.
After the printer has connected to the wireless network, press the
OK
button.
PRO-1000 Page
Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments
Rate Article