Using the projector as a portable disk
The product can be detected as a portable disk. Also, by controlling the connected computer, you can exchange files between the product and the computer.

Note

• During file transmission, make sure that the connection to the USB cable (Micro-USB to USB-A) included in the box is maintained. A disconnection can cause damage in the product and data.
• You may experience problems while connecting from the USB-HUB. Directly insert the USB to the USB port.
• USB-Type A cannot be used for this feature.

1. Turn on the device in Projector mode.

Note
For more information on how to turn on Projector mode, see "Turning on in Projector Mode" 

2. Connect the product and the computer with the included USB cable (Micro-USB to USB-A).
3. Click the USB menu in [Settings] of the product.
4. Check the USB connection with the computer then click Connection.
5. When a connection is complete, transfer files between the product and the computer.

Detecting a USB
Note

• During file transmission, do not disconnect the USB memory. It can damage data and the product.
• You cannot use a USB memory with security features.

1. Turn on the device in Projector mode.
2. Connect a USB memory to the USB terminal of the product (USB-A).
3. When the USB memory is detected as external memory, you will have permission to read and write data within the USB memory.

Detecting a USB mouse
1. Turn on the device in Projector mode.
2. Connect the projector to a USB mouse.
3. When a mouse is recognized, it can be used just like your touchpad.

Updating the product firmware with a USB memory

Note

• During file transmission, do not separate the USB memory. It can damage data and the product.
• Updates requires a minimum of 30% battery level, so make sure to connect to an authentic charger (DC 5V/2A) to successfully run an update.

1. Turn on the device in Projector mode.

Note
For more information on how to turn on Projector mode, see "Turning on in Projector Mode"
2. Before updating, check the software build version installed in the device.
You can check the build number in Settings : Device Information.
3. If you have any queries on the update software, please contact our customer support.

Note
Check if the build number of the software to update later than the currently installed version.
4. Rename the received update file to "update.zip".
5. Save the “update.zip” file to the USB memory.

Note

• If it is saved in the subfolders of the USB memory or the filename is different, then the update will not run.
• The USB memory must be already formatted in the FAT32 format. 

6. Connect the USB memory with the saved file to the device.
Within seconds, the device will automatically read the USB memory and the following update message will be displayed in a pop-up window.


7. Select “Install”.
Update will take place automatically.

Note

• During the update, the power of the device will turn off/on several times.  Do not operate with the device until the update is complete.
• Please note that if you forcefully turn off the power, the software may be damaged.

8. After the update is complete, remove the USB memory.
For a sharing connection after the update, you must register the device in EShareServer. For more details about sharing connection, see "Sharing"