Charging the battery in the EOS R using a USB C adapter.

Article ID: ART173597 | Date published: 01/29/2019 | Date last updated: 01/29/2019


Charging the battery in the EOS R using a USB C adapter.


Using the USB Power Adapter PD-E1, you can charge Battery Pack LP-E6N without removing it from the camera.
  • Battery Pack LP-E6 cannot be charged this way.
  • The battery will stop charging if you operate the camera.
  • If the Battery Grip BG-E22 is being used, both batteries installed must be LP-E6N.
  1. Connect the USB power adapter.
    • With the camera's power switch to , insert the USB power adapter fully into the digital terminal.
  2. Connect the power cord.
    • Connect the power cord to the USB power adapter and plug the other end into a power outlet.
    • Charging begins and the access lamp lights green.
    • When charging is finished the access lamp turns off and [FULL] is indicated on the LCD panel. Unplug the power cord and disconnect the USB power adapter.
  • To protect batteries and keep them in optimal condition, do not charge continuously for more than 24 hours.
  • In the case of charging problems. the access lamp blinks in green, [Err] is displayed on the LCD panel, and a protective circuit stops charging. In the case, unplug the power cord, reattach the battery, and wait for a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments