Ask a Question

How do I connect my DR-G2090 to my computer?

Article ID: ART173715 | Date published: 02/26/2019 | Date last updated: 02/26/2019
 

Description

Connect the scanner to the computer and the power supply. The scanner can be connected via a USB port.

Solution


Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF before connecting it to the computer.

The USB connector is located on the scanner as shown below.



Use only the supplied power cord.
 

Connecting the Power

Connect the supplied power cord into the connector (1) on the back of the scanner and then into an AC outlet (2).


Connecting to a Computer
Use the included USB cable to connect to the computer.


Do not connect the scanner to the computer before installing the software.

The end of the USB cable with the square plug (Type B) connects to the scanner. The other end with the flat plug (Type A) connects to a USB port on the computer.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments