In indoor, low light or backlit conditions in daylight, just raise the built-in flash and press the shutter button to take flash pictures. In the <P> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake

	Press the <> button. In Creative Zone modes, you can press the <> button anytime to take flash pictures.  While the flash is recycling, “buSY” is displayed in the viewfinder, and [BUSY] is displayed on the LCD monitor.
	Press the shutter button halfway. In the bottom left of the viewfinder, check that the <> icon is lit.
	Take the picture. When focus is achieved and you press the shutter button completely, the flash will fire at all times.

Shooting Tips

In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO speed.

Detach the lens hood. Do not get too close to the subject.
If the lens has a hood attached or you are too close to the subject, the bottom of the picture may look dark due to the obstructed flash. For important shots, play back the image and check to make sure the picture does not look unnaturally dark at the bottom part.


 

• When a high ISO speed is set and focusing distance is long, appropriate exposure may not be obtained depending on the subject conditions, etc.
• Do not perform flash photography when the built-in flash is held down with your finger or not fully raised for some other reason.