Changing the Printer Operation Mode (macOS) - TS9520 / TS9521C
Article ID: ART173896 |
| |
Date published: 03/20/2019 |
| |
Date last updated: 03/20/2019 |
Description
If necessary, switch between various modes of printer operation.
Solution
If necessary, switch between various modes of printer operation.
-
Check whether the printer is on and select Device settings from the Remote UI.
-
If necessary, complete the following settings:
Print settings - Prevent paper abrasion
- The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
Check this check box to prevent paper abrasion.
Custom settings - Detect paper setting mismatch
- If the check box is deselected, at the time of printing from a computer, you can continue to print without the message display even if the paper settings set in the Print dialog differs from the paper information registered to the printer.
Ink drying wait time
- You can set the length of the printer rest time until printing of the next page begins. The wait time becomes longer as the value set in the list increases, and shorter as the value decreases.
If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
-
Apply the settings
Click OK.
The printer operates with the modified settings hereafter.