Your PIXMA MG6320 can be connected to a wireless LAN by using the WPS Push Button method.  This will allow you to connect your printer to the network by pressing a WPS button on your router.  Please note that not all routers will have this button.  Check your wireless router's documentation to see if such a button is on your router.



Follow the steps below to connect your PIXMA MG6320 to your wireless network using the WPS Push Button method.
 

1. From the HOME screen, swipe from right to left and tap WLAN setup.
   
   
   
   The printer will search for nearby networks.
   
   
   
   In some instances, you may see the following screens:
   
   
   
   You will then be asked to tap [Start setup] or [To other connection methods].  Tap [Start setup].
   
   
   
   Press and hold the WPS button on your wireless router for about 5 seconds.  Then, tap OK on the screen of the printer.
   
   
   
   The printer will attempt to connect to the network.
   
   
   
   The printer will then be connected to the network.  Tap OK.
   
   
   
   Network setup of the printer is complete.
   
   If a WPS compatible router is not detected, proceed to step 2.
   
   If the printer fails to connect, click here.
    
2. Tap WPS.
   
   
   
   Tap Push button method.
   
   
   
   When the following message appears, tap OK.
   
   
   
   Press and hold the WPS button on your router for 5 seconds.  Then, tap OK on the printer.
   
   
   
   The printer will attempt to connect to the network.
   
   
   
   When this message appears, tap OK.
   
   
   
   The printer is now connected to your network.
   
   If the printer fails to connect, click here.

If you have not installed the drivers and / or software for your printer, you can use the setup CD-ROM to install the drivers and software, or you can download the drivers and software from our website.

Windows:

Under the Drivers tab, download and install the MG6300 MP Drivers.


Under the Software tab, download and install either My Image Garden or Easy-PhotoPrint EX.



macOS:

Under the Drivers tab, download and install all of the drivers shown.



Under the Software tab, download and install My Image Garden and the Canon IJ Network Tool.



For versions of macOS earlier than 10.14, you can download Easy-PhotoPrint EX if desired.

You will need to click the Apple menu, then go into System Preferences.  Go to Printers and Scanners, click the plus sign on the left side of the window, and add the Canon IJ Network listing for the printer to add it to your printer list.





If the printer fails to connect to your network, tap OK.



Turn off the printer, unplug it, and unplug your wireless router.  Wait for 30 seconds, then plug the router back in.  After the router has finished initializing, plug the printer back in, turn it on, and attempt to connect again.