Charging the IVY CLIQ+ instant Camera Printer

Article ID: ART173931 | Date published: 03/28/2019 | Date last updated: 04/03/2019


Fully charge the device via USB before use.


The device uses a built-in battery. Please fully charge the device via the USB cable before using.
  1. Plug in the USB cable into the device and a chargeable USB adapter.

  2. The charging LED light will turn red to indicate charging.

  3. Once fully charged, the charging LED will turn green.

    − Operating time may vary depending on the battery status, operational status
    and environment conditions.

    – When the battery level is lower than 20%, it will enter to "LOW BATT".
    The device can still taken several photo and printing.

Battery Status LED indicator

There are 2 color (red and green) LED indicators built in the device to show the battery and recharging status.
Status LED Indicator Remark
Charging RED  
Full GREEN  
Low Batt RED (ashing) Lower than 20%, LED will be flashing for
30 seconds
Not charging OFF  

• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid condition.
• Please unplug the USB cable from power source after charging.
• Please use supplied USB cable for charging.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments