Ask a Question

Loading Originals on the Platen Glass - MX490 / MX492

Article ID: ART173957 | Date published: 04/04/2019 | Date last updated: 04/15/2019
 

Description

This article provides information on loading an original item (a document or a photo) on the platen glass of your PIXMA MX490 / MX492.

 

Solution

To place an original item (a document or a photo) on the platen glass, follow the steps below.
 

  1. Open the document cover.
     

  2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass.



     Important

    • Be sure to observe the following when loading the original on the platen glass.

      • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
      • Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original.

      Failure to observe the above may cause the scanner to malfunction or the platen glass to break.
       

  3. Close the document cover gently.



     

 Important

  • After loading the original on the platen glass, be sure to close the document cover before starting to copy, fax, or scan.

MX490 / MX492 Page


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments