Installing and Removing the card on the EOS-1D X Mark II
Article ID: ART174016 | | | Date published: 04/22/2019 | | | Date last updated: 04/23/2019 |
Description
Installing and Removing the card on the EOS-1D X Mark II
Solution
Installing the card.
Removing the card.
1. Open the cover.
|
|
2. Insert the card.
|
|
|
|
3. Close the cover.
|
|
4. Set the power switch to <ON>.
|
|
The camera cannot use Type II CF cards or hard disk cards. | |
|
Removing the card.
1. Open the cover.
|
|
2. Remove the card.
|
|
Caution During Live View shooting or movie shooting, if the red icon appears, do not remove the card right away. The card may be hot due to the camera's high internal temperature. Set the power switch to <OFF> and stop shooting for a while. Then remove the card. If you take out the card while it is still hot after shooting, you may drop the card and damage it. Be careful when taking out the card. |
|
|