You can either select and erase images one by one or erase them in one batch. Protected images will not be erased.
 Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a RAW+JPEG image will erase both the RAW and JPEG images. |
Erasing a single image.
Checkmarking [✔] images to be erased in a batch.
By appending <✓> checkmarks to the images to be erased, you can erase multiple images at one time.
 |
1. Select [Erase images].
- Under the [
 1] tab, select [Erase images], then press < >.
|
 |
|
 |
2. Select [Select and erase images].
- Select [Select and erase images], then press <>.
- The images will be displayed.
- If you press the <
 > button and turn the < > dial counterclockwise, you can select an image from a three-image display. To return to the single-image display, turn the <> dial clockwise.
|
 |
3. Erase the images.
- Press the <
 > button.
- Select [OK], then press <>.
- The selected images will be erased.
|
Erasing all images in a folder or on a card.
You can erase all the images in a folder or on a card at one time. When [
1: Erase images] is set to [
All images in folder] or [
All images on card], all the images in the folder or card will be erased.
- To also erase protected images, format the card.
- When [All images on card] is selected, the images will be erased on the card selected under [
 1: Record func+card/folder sel.] with [Record/play] ([Playback]).
|
> button.
> dial to select [Erase], then press <
3: Default Erase option] to [[Erase] selected], you can erase images quicker.