Installing and removing the card on the EOS 7D Mark II
Article ID: ART174096
|
Date published: 04/26/2019
|
Date last updated: 04/26/2019
Description
Installing and removing the card on the EOS 7D Mark II
Solution
Installing the card
1. Open the cover.
Slide the cover as shown by the arrows to open it.
2. Insert the card.
The camera-front side slot is for a CF card, and the camera-back side slot is for an SD card.
Face the CF card's label toward you and insert the end with the small holes into the camera. If the card is inserted in the wrong way, it may damage the camera.
The CF card eject button will stick out.
With the SD card's label facing you, push in the card until it clicks in place.
3. Close the cover.
Close the cover and slide it in the direction shown by the arrows until it snaps shut.
When you set the power switch to <ON>, the number of possible shots and the loaded card(s) will be displayed on the LCD monitor.
The images will be recorded to the card indicated by the arrow <> icon.
Removing the card
1. Open the cover.
Set the power switch to <OFF>.
Make sure the access lamp is off, then open the cover.
If [Recording...] is displayed, close the cover.
2. Remove the card.
To remove the CF card, push the eject button.
To remove the SD card, push it in gently and release it. Then pull it out.
> icon.
