You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. SDHC and SDXC memory cards with UHS-I can also be used. The captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to enable writing and erasing.
Installing the card
1. Open the cover.
Slide the cover as shown by the arrows to open it.
2. Insert the card.
As shown by the illustration, face the card's label side toward you and insert it until it clicks in place.
3. Close the cover.
Close the cover and slide it in the direction shown by the arrows until it snaps shut.
When you set the power switch to <ON>, the number of possible shots will be displayed on the LCD monitor.
Removing the card
1. Open the cover.
Set the power switch to <OFF>.
Make sure the access lamp is off, then open the cover.