Installing and removing the battery on the EOS 80D
Article ID: ART174106
|
Date published: 04/26/2019
|
Date last updated: 04/26/2019
Description
Installing and removing the battery on the EOS 80D
Solution
Load a fully charged Battery Pack LP-E6N (or LP-E6) into the camera. The camera's viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. If the battery is not installed, the picture in the viewfinder becomes blurred and focus cannot be achieved.
Installing the battery.
1. Open the cover.
Slide the lever as shown by the arrows and open the cover.
2. Insert the battery.
Insert the end with the electrical contacts.
Insert the battery until it locks in place.
3. Close the cover.
Press the cover until it snaps shut.
Removing the battery
Open the cover and remove the battery.
Press the battery lock lever as shown by the arrow and remove the battery.
To prevent short circuiting of the electrical contacts, be sure to attach the provided protective cover to the battery.
