Ask a Question

Installing and removing the battery on the EOS Rebel T1i

Article ID: ART174147 | Date published: 04/29/2019 | Date last updated: 04/29/2019
 

Description

Installing and removing the battery on the EOS Rebel T1i

Solution

Load a fully charged Battery Pack LP-E5 into the camera.

Installing the battery

1. Open the battery compartment cover.

  • Slide the lever as shown by the arrow and open the cover.

2. Insert the battery.

  • Insert the end with the battery contacts.
  • Insert the battery until it locks in place.

3. Close the cover.

  • Press the cover until it snaps shut.

Removing the battery

1. Open the cover and remove the battery.

  • Press the battery release lever as shown by the arrow and remove the battery.
  • To prevent short circuiting, be sure to attach the protective cover to the battery.
  
 
 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments