|
Basic Copy Operations This section describes the basic operation procedure used to copy an original.
1. Place the original(s).
2. Select <Copy> in the Home screen.
3. Select <Number of Copies>.
4. Enter the number of copies, and press  .
- If you have entered an incorrect value, use the [Reset] key to clear it.
5. Specify the copy settings as necessary.
NOTE
- For details, see the "User's Guide" from the Canon website (canon.com/oip-manual).
6. Press  .
 Copying starts.
- If you want to cancel, select <Cancel>
 <Yes>.
 For N on 1 copying
For N on 1 copying, the screen prompting you to load the next original is displayed.
1. Place the next original on the platen glass, and Press .
- You can also specify <Density> separately for each original.
- Repeat this step until you finish scanning the entire original.
2. Select <Start Copying>.
NOTE
- When the <Size/Settings Mismatch> or <The memory is full. Scanning will be canceled. Print?> message is shown in the display.
IMPORTANT
When copying originals with text or images that extend to the edges of the page
- The edges of the original might not be copied. For more information about the scan margins, see the "User's Guide" from the Canon website (canon.com/oip-manual).
Selecting the Type of Original for Copying You can select the optical image quality for the copy depending on the original type, such as text-only documents, documents with charts and graphs, or magazine photos.
<Copy> <Original Type> Select the original type
| <Text> | Suitable when copying originals that only contain text. |
| <Text/Photo (High Speed)> | Suitable when copying originals that contain both text and photos. Priority is given to speed over image quality. |
| <Text/Photo> | Suitable when copying originals that contain both text and photos. |
| <Photo> | Suitable when copying originals that contain printed photos, such as magazines or pamphlets. |
NOTE
- If <Text/Photo (High Speed)>, <Text/Photo>, or <Photo> is selected and <Density> is set to <Auto Density>, it changes to <Manual Density>.
Canceling Copies If you want to cancel copying immediately after pressing , select <Cancel> on the screen or press  on the operation panel. You can also cancel copying after checking the copy status.
 Select <Cancel> on the Screen That is Displayed While Copying
Press to Cancel
Check the copy job status before canceling
<Status Monitor> <Copy/Print Job> 
<Job Status> Select the document in the <Copy/Print Job Status> screen <Cancel> <Yes>
|
