You can print out the network settings of the machine such as its IP address and SSID.
Important
- This print out contains valuable information about your computer. Handle it with care.
Follow these steps to print the LAN details for your printer:
- Press the power button to turn on the machine.
- Press the Menu button.
- Use the left or right arrow to select Maintenance / settings, then press OK.
- Use the left or right arrow to select Device settings, then press OK.
- Use the left or right arrow to select LAN settings, then press OK.
- Use the left or right arrow to select Print LAN details, then press OK.
The following information on the machine's network setting is printed out.
- Printer name
- Firmware version
- Wireless LAN ("Enabled" or "Disabled")
- Standard
- Destination
- MAC address
- Network type
- SSID
- Channel
- Encryption (encryption type or "OFF")
- Authentication
- Attached Information
- Link status
- Signal Strength
- Link Quality
- Transmission Rate
- TCP/IP
- Mode
- IP Address
- Subnet Mask
- Default Gateway
- Wired LAN ("Enabled" or "Disabled")
- MAC address
- Link status
- Transmission Rate
- TCP/IP
- Mode
- IP Address
- Subnet Mask
- Default Gateway
- Printer access control
- MAC address ("ON" or "OFF")
- IP address ("ON" or "OFF")
- Admin password ("ON" or "OFF")
- Device status (usually "Available")
Information on the computer's network setting is printed as well.
Note
- Some items may not be printed out depending on your printer settings or printer status.
- The printer has two different MAC addresses. For settings, use one of them depending on your connection type (wireless LAN or wired LAN).