Pressing the Setup button (A) on the operation panel displays the Setup menu screen, which enables you to perform printer settings and maintenance.
Selecting a Menu or Setting Item
In a menu screen or settings screen, use the 
button (B) to select an item or option, and then press the OK button (C) to proceed with the procedure.
To return to the previous screen, press the Back button (D).
Example: Changing the setting for Prevent Abrasion.
-
Press the Setup button (A).
-
Use the buttons (B) to select Device settings and press the OK button (C).
-
Press the OK button (C).
-
Press the OK button (C).
-
Use the buttons (B) to change the setting and press the OK button (C).
Network Status Indication
Wi-Fi setting and the network status indicate by the icon in the standby screen.
If the 
icon appears on the LCD, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router.
Depending on the signal state, the icon will change.
|
|
Signal strength: 81 % or more
You can use the printer over Wi-Fi without any problems.
|
|
|
Signal strength: 51 % or more
The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router.
|
|
|
Signal strength: 50 % or less
The problem such as the printer cannot print may occur. Place the printer near the wireless router.
|
|
|
Wi-Fi is enabled but the printer is not connected to the wireless router.
|
If the 
icon appears on the LCD, it indicates that the wired LAN is enabled.
Note
-
When Wi-Fi, wired LAN, or both are disabled, the icon, icon, or both are not displayed.
