C700 C700 FF Face Detection​

1. Press ALT  [AF]  [TRACKING] to activate the tracking function.
   • Alternatively, you can press an assignable button set to [Tracking].
   • The subject selection mark  will appear on the monitoring screen.
   • Press the BACK button to end the tracking function's standby mode.
2. Place the center of the  mark on the subject you wish to track.
   Setup screen: Press [], [], [], [].
   ​Monitoring menu: Use the joystick on the optional viewfinder.
   • Press [CENTER] (setup screen) or press the BACK button on the optional viewfinder to return the  mark to the center position.
3. Press [START ] (setup screen) or press SET on the optional viewfinder to start tracking the subject.
   • If the tracking failed, the ​ mark will turn red momentarily. Select the subject again.
4. The face detection frame or  mark changes to a tracking frame and the camera will start tracking the selected subject.
   • During continuous AF, the camera will keep focusing on the selected subject. During one-shot AF, the camera will focus on the selected subject while you hold the ONE-SHOT AF button pressed down.
   • You can turn the SELECT dial on the camera to adjust the focus manually.
   • Press [CANCEL ] (setup screen) or press the BACK button on the optional viewfinder to end the tracking function and return the camera to the focus mode that was used previously.
   • You can also press the assignable button set to [Tracking] to return to the tracking standby mode (subject selection screen).

• The camera may start tracking the incorrect subject if there is another subject in the picture with similar color/pattern characteristics. In that case, select the desired subject again.
• The tracking function cannot be used in the same cases as face detection.