Ask a Question

Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals on the EOS C700 models

Article ID: ART174773 | Date published: 06/19/2019 | Date last updated: 06/19/2019
 

Description

Using the INPUT 1/INPUT 2 terminals, you can record audio independently to two audio channels from a microphone or audio input source.
On the camera, set the audio-related switches for the INPUT terminal you wish to use according to the type of audio input you wish to use.

Solution

Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals

  1. Set the audio input selection switch for the desired INPUT terminal to AES/EBU (digital audio) or ANALOG (analog audio).
  2. If you selected analog audio, set the INPUT terminal's ANALOG (analog source selection) switch to MIC (microphone) or LINE (audio device).
    • To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone forst, before turning the phantom power on. Keep the microphone connected when turning off the phantom power.
    • When using the INPUT terminals to record to only one channel, use the INPUT 1 terminal.

 IMPORTANT
  • When connecting an analog microphone or device that does not support phantom power, make sure to set the corresponding INPUT switch to MIC or LINE, respectively. If you set the switch to MIC+48V, the microphone or device may be damaged.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments