Introduction Send images to a smartphone as follows.
- Connecting to a Bluetooth-compatible Smartphone via Wi-Fi
By connecting to a Bluetooth-compatible smartphone via Bluetooth in advance, you can connect via Wi-Fi simply by performing an operation on the camera or smartphone.
- Connecting to Smartphones via Wi-Fi with the Wi-Fi Button
You can use Wi-Fi to connect to a smartphone that is not compatible with Bluetooth or a smartphone that cannot use its Bluetooth function.
IMPORTANT
- Before connecting to the camera, you must install the free dedicated Camera Connect app on the smartphone.
- Camera Connect can be installed from the Google Play. You can also access the Google Play from a QR code that you can display on the camera when registering the smartphone on the camera.
- Use the latest version of the smartphone OS.
- Activate Bluetooth and Wi-Fi on the smartphone. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen.
*Bluetooth low energy technology (hereafter referred to as "Bluetooth")
NOTE
- In the following explanation, smartphone setting procedures are indicated by the
icon, and camera setting procedures are indicated by the icon.
- For convenience, smartphones, tablets, and other compatible devices are collectively referred to as "smartphones".
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi
 1. Confirm the smartphone's settings.
- Make sure that [Airplane mode] is not set.
- Turn [Wi-Fi] to [ON].
- Set the [Bluetooth] switch to [ON].
 2. Download Camera Connect from the Google Play and install it on the smartphone.
 3. Turn the camera on.
 4. Press the  button.
 5. Use the zoom lever to choose the [  ] tab.
 ã
 6. Press the  /  buttons to choose [ Wi-Fi/Bluetooth connection ].
 ã
 7. Press the  /  buttons to choose [ Connect to smartphone ], press the  button.
 8. Press the  /  buttons to choose [Add a device to connect to], press the  button.
 9. Press the  /  buttons to choose [Do not display], press the  button.
 10. Press the  /  buttons to choose [ Pair via Bluetooth ], press the  button.
 11. A message is displayed indicating that pairing is in progress.
 12. Touch the [Camera Connect] (  ) application icon on the smartphone to start Camera Connect.
 13. After the camera is recognized, a camera selection screen is displayed.
- Touch the camera to connect.
 14. Press the  /  buttons to choose [OK], press the  button.
 15. Press the  button of this screen.
- The Pairing between the camera and the smartphone should be complete, and connected.
IMPORTANT
- Any active Bluetooth connections will be lost if you remove the camera battery pack. The connection will be reestablished when you insert the battery pack and turn on the camera.
- Battery life may be shorter when you use the camera after pairing with a smartphone, because power is consumed even when the camera is off.
- Before bringing the camera to places where the use of electronic devices is restricted, disable active Bluetooth communication (which is used even when the camera is off) by choosing
[ Wireless communication settings ] -> [ Bluetooth function ](twice) -> [ Disable ].
 16. Choose [Images on camera] in Camera Connect.
 17. Use the smartphone to import images from the camera to the smartphone.
- When the camera is connected to the smartphone, a list of the images on the camera will appear in Camera Connect. Tap [Select] appearing in the upper right of the screen.
 18. After the screen refreshes, choose the desired images (  ), and then touch [  ] on the bottom of the screen (  ).
- To select all images at once, press the [
] icon in the upper right of the screen.
NOTE
- A screen to set [JPEG format save size] may be displayed, so choose an option and press [OK].
 19. After the images have been saved, touch [  ] appearing in the upper right of the screen.
 20. Touch [  ] in the upper left of the screen to return to the menu screen.
 21. To end the connection, touch the [  ] icon displayed in the upper right of the screen.
 22. Touch [Yes].
IMPORTANT
- To turn off Wi-Fi signal transmission, choose
[ Wireless communication settings ] -> [ Wi-Fi settings ] -> [ Wi-Fi ] -> [ Disable ].
- You can change the camera nickname in
[ Wireless communication settings ] -> [ Nickname ].
- You can send images to a smartphone connected via Wi-Fi or paired via Bluetooth by choosing the images from the cameraâs playback screen. Press the
button and choose [ ].
Connecting to Smartphones via Wi-Fi with the Wi-Fi Button
 1. Confirm the smartphone's settings.
- Make sure that [Airplane mode] is not set.
- Turn [Wi-Fi] to [ON].
 2. Download Camera Connect from the Google Play and install it on the smartphone.
 3. Press the  button.
NOTE
- If the following screen appears, press the
/ buttons to switch to other screens.
 4. Press the  /  buttons to choose [  ], then press the  button.
 5. Press the  /  buttons to choose [Add a device to connect to], press the  button.
 ã
 6. Press the  /  buttons to choose [Do not display], press the  button.
 7. Press the  /  buttons to choose [ Connect via Wi-Fi ], press the  button.
 8. The SSID (  ) and password (  ) will be displayed on the screen.
 9. Turn Wi-Fi settings to ON in your smartphone, choose the SSID (  ) from step 8.
 10. Input password from step 8 (  ).
 11. Once the connection between the camera and the smartphone has been confirmed, press the home button to return to the home screen.
 12. Touch the [Camera Connect] (  ) application icon on the smartphone to start Camera Connect.
 13. After the camera is recognized, a camera selection screen is displayed.
- Touch the camera to connect.
 14. Press the  /  buttons to choose [OK], press the  button.
 15. The camera screen will show [Wi-Fi on].
 16. Choose [Images on camera] in Camera Connect.
 17. Use the smartphone to import images from the camera to the smartphone.
- Touch [Select] in the upper right of the screen.
 18. After the screen refreshes, choose the desired images (  ), and then touch [  ] on the bottom of the screen (  ).
- To select all images at once, press the [
] icon in the upper right of the screen.
NOTE
- A screen to set [JPEG format save size] may be displayed, so choose an option and press [OK].
 19. After the images have been saved, touch [  ] appearing in the upper right of the screen.
 20. Touch [  ] in the upper left of the screen to return to the menu screen.
 21. To end the connection, touch the [  ] icon displayed in the upper right of the screen.
 22. Touch [Yes].
IMPORTANT
- To turn off Wi-Fi signal transmission, choose
[ Wireless communication settings ] -> [ Wi-Fi settings ] -> [ Wi-Fi ] -> [ Disable ].
- You can change the camera nickname in
[ Wireless communication settings ] -> [ Nickname ].
- You can send images to a smartphone connected via Wi-Fi or paired via Bluetooth by choosing the images from the cameraâs playback screen. Press the
button and choose [ ].
On-Screen Keyboard Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you are using.
| â¢Entering characters Touch the characters to enter them. |
| â¢Moving the cursor Choose [
] or [
] and press the
button. You can also move the cursor by turning the
ring.
|
| â¢Switching input modes Choose [
], press the
button to switch to capital letters. Choose [
], press the
button to switch to numbers or symbols. |
| â¢Deleting characters Choose [
] and press the
button. The previous character will be deleted. |
| â¢Confirming input After pressing the
button, press the
/
buttons to choose [OK], press the
button. |
|