PIXMA TS3320 / TS3322 Easy Wireless Connect setup - Mac Computers

Article ID: ART175291 | Date published: 09/10/2019 | Date last updated: 09/10/2019
 

Description

Establish the connection to the wireless LAN using Easy Wireles Connect

Solution

Wireless Setup - Mac** Computers

**Instructions in this article are for setup on a Mac computer.  If setting up on Windows, click here for instructions

To be able to use the PIXMA TS series printer to print or scan wirelessly on a Mac computer, the printer must first be connected to the Wireless Network and software drivers and applications installed on the computer.  The instructions /  screenshots  below show the setup program steps  when using the "Easy Wireless Connect" method to connect to the wireless network.

The setup process consists of 2 parts: 

1. Starting Easy Wireless Connect on the printer, and
2. Downloading and running the setup file to install the drivers and software.

 

Start  Easy Wireless Connect on the printer.

Prior to starting setup on the Computer, Smartphone or tablet device, start the Easy wireless connect on the printer.  Then complete the setup on the computer or device. 
See the procedure below to start the Easy Wireless connect.

  1. Press and hold the Direct button (A) on the printer, and then release the button when Direct icon(B) flashes.

    figure: Press and hold the Direct button and the Direct icon flashes
  2. Make sure Network status icon and the horizontal bars (C) flash as shown in the illustration below.

    figure: Network status icon and the lower two horizontal bars flash

     

Download and run the setup file.*
 

Get the Setup File
 

Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.

Dock

* Double-click the downloaded .dmg file if setup icon did not appear
 

  1. Click Next


     
  2. Enter the network password and click Install Helper



     
  3. Click Start Setup


     
  4. Click Next



     
  5. Click Yes on the License Agreement



     
  6. Select Do not agree or Agree



    If Do not agree was selected, the following information appears.  Click OK


     
  7. Click Next on the Connection Method screen



     
  8. Select Allow on the keychain message



     
  9. ** Depending on your network setup, the following screens may appear.  Be sure to select an SSID (network) in the dropdown list running on the 2.4Ghz frequency. If not sure, check with your router's documentation.  After selecting the SSID, enter the password in the next screen





     
  10. Click Next on Connection completed



     
  11. Click Add Printer


     
  12. Select your printer series with Bonjour Multifunction listed in the Kind column and click Add


     
  13. Click Next


     
  14. Click Next


     
  15. If you wish to download and install any additional software,  click Continue online


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments