PIXMA TS3320 / TS3322 Easy Wireless Connect setup - Mac Computers

Article ID: ART175291 | Date published: 09/10/2019 | Date last updated: 03/10/2023


Connect your PIXMA TS3320 / TS3322 printer to a Mac with the Easy Wireless Connect method.


To be able to use the PIXMA TS series printer to print or scan wirelessly on a Mac® computer, the printer must first be connected to the wireless network and software, drivers and applications installed on the computer.  The instructions /  screenshots  below show the setup program steps  when using the Easy Wireless Connect method to connect to the wireless network.

 Instructions in this article are for setup on a Mac computer.  If setting up on Windows, click here for instructions

The setup process consists of two parts: 

1. Start Easy Wireless Connect on the printer, and
2. Download and run the setup file to install the drivers and software.


Start  Easy Wireless Connect on the printer.

Prior to starting setup on the Computer, Smartphone or tablet device, start the Easy wireless connect on the printer.  Then complete the setup on the computer or device. 
See the procedure below to start the Easy Wireless connect.

 If you have already initiated Easy wireless connect on your printer, please skip this step and proceed to the Download and run the setup file instructions below.

  1. Press and hold the Direct button (A) on the printer, and then release the button when Direct icon(B) flashes.

    figure: Press and hold the Direct button and the Direct icon flashes

  2. Make sure the network iconNetwork status icon and the horizontal bars (C) flash as shown in the illustration below.

    figure: Network status icon and the lower two horizontal bars flash


Download and run the setup file.

Get the Setup File

Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.


  Double-click the downloaded .dmg file if setup icon did not appear

  1. Click Next

  2. Enter the network password and click Install Helper

  3. Click Start Setup

  4. Click Next

  5. Click Yes on the License Agreement

  6. Select Do not agree or Agree

    If Do not agree was selected, the following information appears. Click OK

  7. Click Next on the Connection Method screen

  8. Select Allow on the keychain message

  9. Depending on your network setup, the following screens may appear.  Be sure to select an SSID (network) in the dropdown list running on the 2.4Ghz frequency. If not sure, check with your router's documentation.  After selecting the SSID, enter the password in the next screen

  10. Click Next on Connection completed

     If your printer is not detected, make sure that the computer has reconnected to the correct network. Also, you may need to temporarily disable any firewall software, or you may need to open blocked ports in the firewall. If your Mac is connected to a VPN (Virtual Private Network), temporarily disconnect from the VPN and try the setup again. Also, if you are using a dual-band router, further troubleshooting information can be found here.

  11. Click Add Printer

  12. Select your printer series with Bonjour Multifunction listed in the Kind column and click Add

  13. Click Next

  14. Click Next

  15. If you wish to download and install any additional software,  click Continue online

    If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

    Or if you still need help, visit our Canon Community by clicking the button below to get answers:

    Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments