TS6320 WPS Setup

Article ID: ART175346 | Date published: 09/12/2019 | Date last updated: 09/12/2019


Setup the Wireless Connection using a WPS-compatible wireless router


WPS Connection

Follow the procedure below to set up the network connection using Wifi Protected Setup (WPS)

  1. Press the OK button.

  2. Use the Up or Down button (A) to select Wi-Fi setup and press the OK button.

  3. Select WPS (Push button method) and press the OK button.

  4. Press the OK button.

  5. Press and hold the WPS button on the wireless router.


    • For more on pressing the WPS button, see the wireless router manual.
  6. Press the OK button on the printer within 2 minutes.

    If a different screen appears, see "Troubleshooting."

  7. When the screen on the below appears, press the OK button.

    Completion screen (Connected to the wireless router.)

    If a different screen appears, see "Troubleshooting."

  8. Press the Back button (A).

  9. The network connection setup is now complete.

    Return to the software and proceed with the installation.


    Click Setup icon in the taskbar, follow the on-screen instructions to proceed with setup.


    Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments