TS3320 WPS Setup

Article ID: ART175348 | Date published: 09/12/2019 | Date last updated: 09/12/2019


Setup the Wireless Connection using a WPS-compatible wireless router


WPS Connection

Follow the procedure below to set up the network connection using Wifi Protected Setup (WPS)

  1. Make sure the WPS button on the wireless router is ready to be pressed.

  2. Press and hold the Network button (A) on the printer, and then release the button when Network status icon (B) flashes.

    figure: Press and hold the Network button and the Network status icon flashes
  3. Press and hold the WPS button on the wireless router within 2 minutes.


    • For more on pressing the WPS button, see the wireless router manual.
  4. When connection to the wireless router is complete, Network status icon and Signal Strength icon (C) will be lit.

    figure: The Network status icon and Signal Strength icon are lit

    If the Alarm lamp lights up, see "Troubleshooting."

    The network connection setup is now complete.

    If performing setup with software, return to the software and proceed with the installation.


    Click Setup icon in the taskbar, follow the on-screen instructions to proceed with setup.



    Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments