Starting Easy Wireless Connect - TS3320 / TS3322

Article ID: ART175359 | Date published: 09/13/2019 | Date last updated: 09/13/2019
 

Description

Preliminary step to connect to a wireless network.  Set the printer into Easy Wireless Connect mode, then run the setup application

Solution

Start  Easy Wireless Connect on the printer.

Prior to starting setup on the Computer, Smartphone or tablet device, start the Easy wireless connect on the printer.  Then complete the setup on the computer or device. 
See the procedure below to start the Easy Wireless connect.

  1. Press and hold the Direct button (A) on the printer, and then release the button when Direct icon(B) flashes.

    figure: Press and hold the Direct button and the Direct icon flashes
  2. Make sure Network status icon and the horizontal bars (C) flash as shown in the illustration below.

    figure: Network status icon and the lower two horizontal bars flash

     

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments