Starting Easy Wireless Connect - TS3320 / TS3322

Article ID: ART175359 | Date published: 09/13/2019 | Date last updated: 06/02/2021


This article explains how to place the PIXMA TS3320 / TS3322 into Easy Wireless Connect mode.



Start  Easy Wireless Connect on the printer.

Prior to starting setup on the Computer, Smartphone or tablet device, start the Easy wireless connect on the printer.  Then complete the setup on the computer or device. 
See the procedure below to start the Easy Wireless connect.

  1. Press and hold the Direct button (A) on the printer, and then release the button when Direct icon(B) flashes.

    figure: Press and hold the Direct button and the Direct icon flashes
  2. Make sure Network status icon and the horizontal bars (C) flash as shown in the illustration below.

    figure: Network status icon and the lower two horizontal bars flash

After the printer has been placed into Easy Wireless Connect mode, you will need to use a computer or mobile device to send the network information to the printer in order to connect the printer to your wireless network.

Click here if you are using a Windows PC.

Click here if you are using a Mac.

Click here if you are using an iOS device.

Click here if you are using an Android device.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments