|
|
|
If the screen shown above is not displayed when paper is loaded
If you always load the same paper in the multi-purpose tray, you can skip the paper setting operations by registering the paper size and type as the default setting. When the default setting is registered, however, the screen shown above is not displayed. To display the screen, select <Specify When Loading Paper>
|
1. Select the paper size.
If the loaded paper size is not displayed, select <Other Sizes>.
When loading custom size paper
|
1
|
Select <Custom>.
|
|
2
|
Specify the length of the <X> side and <Y> side.
Touch panel model
Select <X> or <Y>, and enter the length of each side using <+>/<->, with  /  to move the cursor between the digits for inputting whole numbers and fractions. If you register the paper size you use frequently on buttons <S1> to <S3>, you can call them up with one touch.
Black and white LCD model
Execute the following steps in sequence: <X>  enter the length of the <X> side using  /  , with  /  to move the cursor between the digits for inputting whole numbers and fractions  <Y> enter the length of the <Y> side |
|
3
|
Select <Apply>.
|
About <Free Size>
If you frequently need to change the paper to be loaded, set to <Free Size>; this will reduce the number of steps required to change the setting each time. You can also display an error message when the setting in the printer driver is significantly different from the size of the loaded paper.
2. Select the paper type.
About <Free>
- If you frequently need to change the paper to be loaded, set to <Free>; this will reduce the number of steps required to change the setting each time. However, take note that this setting lets the machine perform printing even if there is mismatch between the paper type setting in the printer driver and the paper type actually loaded in the machine.
- When the paper type setting in the printer driver is [Auto], the machine operates the same way as when the paper type is [Plain 1].
