How to register an AF point on the EOS-1D X Mark II.

Article ID: ART175397 | Date published: 09/20/2019 | Date last updated: 09/20/2019


How to register an AF point on the EOS-1D X Mark II.


When [Registered AF Point] is set, you can press the <AF-ON> or <*> button to switch to the registered AF point.

Registering the AF Point
  1. Set the AF Aera selection mode to one of the followsing: Single-point Spot AF (manual selection), Single-point AF (manual selection), AF point expansion (manual selection ), AF point expansion (manual selection, surrounding points), or Automatic selection AF. Zone AF and Large Zone AF cannot be selected.
  2. Select an AF point manually.
  3. Hold down the < > button and press the <ISO> button. A beep will sound and the AF point will be registered. If the AF area selection mode is set to any setting other than Automatic selection AF, the registered AF point will blink.
To cancel the registered AF point, hold down the <> button, then pres the <> button. The registered AF point will also be cancelled if you select [4:Clear all camera settings].

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments