|
When the camera and iPad are connected via Wi-Fi, the images on the camera can be imported to the iPad and displayed in Photo Professional Express. The two ways to import images are as follows.
- Use Digital Photo Professional Express to import JPEG images/RAW (CR3) images
- Use Camera Connect to import JPEG images/RAW (CR3) images
IMPORTANT
- It is recommended to save the images imported to Digital Photo Professional Express to a memory card or another location other than the iPad, should there be a need to use the images outside of Digital Photo Professional Express.
- Before connecting the camera, you must install the free Camera Connect app to the iPad, which can be downloaded from the App Store.
- Use Camera Connect version 2.5.20 or over.
- See "Related Information" for details on what iPad can be connected to the camera via Wi-Fi.
- Interface or functions of Digital Photo Professional Express or Camera Connect are subject to change, for application improvements or update. In such a case, features may differ from sample screens or operation instructions in this explanation.
NOTE
- Procedures starting with an
 illustration, are steps for the iPad. procedures starting with a  illustration, are steps for the camera.
- Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may decrease the speed of your image transfers.
- Depending on the condition of the network you are using, it may take a longer time to transfer images.
- A memory card must be in the camera for the connection.
Using Digital Photo Professional Express to import images in JPEG and RAW(CR3)
1. Install Camera Connect.
2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].
3. Turn the camera on.
4. Press the <  > button.
5. Press the <  > <  > buttons to select the [  ] tab, and press <  >.
 ã 
6. Press the < > < > buttons and select the [ 1 ] tab.
7. Press the <  > <  > buttons to select [ Wi-Fi/Bluetooth connection ], and press < >.
ã 
8. Press the < > < > buttons to select [ Connect to smartphone ], and press < >.
NOTE
- If the history is displayed, switch the screen with the < > < > keys.
9. Press the < > < > buttons to select [ Add a device to connect to ], and press < >.
10. Press the < > < > buttons to select [ Do not display ], and press < >.
11. Press the < > < > buttons to select [ Connect via Wi-Fi ], and press < >.
12. The SSID (  ) and password (  ) will be displayed on the screen.
13. Open [ Settings ] on the iPad, select [ Wi-Fi ] (  ) to confirm the SSID (  ) is the same as the one displayed on the camera screen, and tap to select.
14. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).
15. Open Digital Photo Professional Express.
16. Tap [Import from Canon Camera Connect (RAW/JPEG)] from [  ] on the upper left hand.
NOTE
- If Camera Connect is not installed, the App Store page will be displayed. In order to connect the camera to the iPad using Wi-Fi, the connection must be made through Camera Connect. Please install Camera Connect first.
17. Tap [ OK ].
18. Tap [ Canon EOS M200 ].
19. Confirm that [ Operate the camera to establish a connection ] is displayed.
20. Press the < > < > buttons to select [ OK ] and press < >.
21. [ Wi-Fi on ] will be displayed on the camera screen.
22. Tap [ Images on camera ].
23.ãTap [ Select ].
24. Tap on the imported images to select images.
- Selected images will have a
 displayed ().
- Tap on [
 ] to select all.
- After selecting, tap on
 ().
25. Select image size, and tapã[ OK ].
26. The selected images will be imported into Digital Photo Professional Express.
27. Once the images have been imported, tap [ Open linked app ].
28. Tap [ Yes ].
29. Digital Photo Professional Express will open, tap [ OK ].
30. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.
Using Camera Connect to import images in JPEG or RAW (CR3)
1. Install Camera Connect.
2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].
3. Turn the camera on.
4. Press the < > button.
5. Press the < > < > buttons to select the [ ] tab, and press < >.
ã
6. Press the < > < > buttons and select the [ 1 ] tab.
7. Press the < > < > buttons to select [ Wi-Fi/Bluetooth connection ], and press < >.
ã
8. Press the < > < > buttons to select [ Connect to smartphone ], and press < >.
NOTE
- If the history is displayed, switch the screen with the < > < > keys.
9. Press the < > < > buttons to select [ Add a device to connect to ], and press < >.
10. Press the < > < > buttons to select [ Do not display ], and press < >.
11. Press the < > < > buttons to select [ Connect via Wi-Fi ], and press < >.
12. The SSID ( ) and password ( ) will be displayed on the screen.
13. Open [ Settings ] on the iPad, select [ Wi-Fi ] ( ) to confirm the SSID ( ) is the same as the one displayed on the camera screen, and tap to select.
14. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).
15. Go to home screen, and open Camera Connect.
16. Tap [ Canon EOS M200 ].
17. Confirm that [ Operate the camera to establish a connection ] is displayed.
18. Press the < > < > buttons to select [ OK ] and press < >.
19. [ Wi-Fi on ] will be displayed on the camera screen.
20. Tap [ Images on camera ] .
21. Tap [ Select ].
22. Tap on the imported images to select images.
- Selected images will have a displayed ().
- Tap on [ ] to select all.
- After selecting, tap ().
23. Tap [Digital Photo Professional Express], to choose and tap [ Select ].
24. Select image size, and tap [ OK ].
25. The selected images will be imported into Digital Photo Professional Express.
26. Once the images have been imported, tap [ Open linked app ].
27. Tap [ Yes ].
28. Digital Photo Professional Express will open, tap [ OK ].
29. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.
Virtual Keyboard Operations Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you are using.
|
Input area, for entering text |
|
Cursor keys, for moving in the input area |
Current no. of characters/no. available |
Keyboard |
Switch input modes |
Space |
Delete a character in the input area |
Finish the text entry |
- To move the cursor within , turn the <
 > dial.
- To move within and â, use the <
 > cross keys.
- Press < > to confirm input or when switching input modes.
|
