IMPORTANT

• It is recommended to save the images imported to Digital Photo Professional Express to a memory card or another location other than the iPad, should there be a need to use the images outside of Digital Photo Professional Express.
• Before connecting the camera, you must install the free Camera Connect app to the iPad, which can be downloaded from the App Store.
• Use Camera Connect version 2.5.0 or over.
• See "Related Information" for details on what iPad can be connected to the camera via Wi-Fi.
• Interface or functions of Digital Photo Professional Express or Camera Connect are subject to change, for application improvements or update. In such a case, features may differ from sample screens or operation instructions in this explanation.

NOTE

• procedures starting with an illustration, are steps for the iPad. procedures starting with a illustration, are steps for the camera.
• Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may decrease the speed of your image transfers.
• Depending on the condition of the network you are using, it may take a longer time to transfer images.
• A memory card must be in the camera for the connection.

Using Digital Photo Professional Express to import images in JPEG and RAW(CR3)

1. Install Camera Connect.

2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].

3. Press the button.

NOTE

When the [Nickname] screen appears,

1. When the [Nickname] screen appears, press the button.

　

2. To use the nickname displayed, press the button.

• Nicknames are 1 – 8 characters and can be changed later. For more information on using the keyboard, please refer to "On-Screen Keyboard".

3. Press the / buttons to choose [ OK ], and then press the button.

　

• If the following screen appears, press the / buttons to switch to other screens.

4. Press the / buttons to choose [ ], then press the button.

5. Press the / buttons to choose [Register a device for connection] , press the button.

　

6. Press the / buttons to choose [Do not display] , press the button.

7. The SSID ( ) and password ( ) will be displayed on the screen.

8. Open [ Settings ] on the iPad, select [ Wi-Fi ] to confirm the SSID is the same as the one displayed on the camera screen, and tap to select.

9. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).

10. Open Digital Photo Professional Express.

11. Tap [Import from Canon Camera Connect (RAW/JPEG)] from [ ] on the upper left hand.

NOTE

If Camera Connect is not installed, the App Store page will be displayed. In order to connect the camera to the iPad using Wi-Fi, the connection must be made through Camera Connect. Please install Camera Connect first.

12. Tap [ OK ].

13. Tap [ Canon PowerShot G5 X Mark II ].

14. Confirm that [ Operate the camera to establish a connection ] is displayed.

15. Choose [ OK ] and press the button.

16. [ Wi-Fi on ] will be displayed on the camera screen.

17. Tap [ Images on camera ].

18. Tap [ Select ].

19. Tap on the imported images to select images.

20. Select image size, and tap　[ OK ].

21. The selected images will be imported into Digital Photo Professional Express.

22. Once the images have been imported, tap [ Open linked app ].

23. Tap [ Yes ].

24. Digital Photo Professional Express will open, tap [ OK ].

25. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.

Using Camera Connect to import images in JPEG or RAW (CR3)

1. Install Camera Connect.

2. Open [ Settings ] on iPad, make sure the [ Airplane Mode ] is [ OFF ].

3. Press the button.

NOTE

When the [Nickname] screen appears,

1. When the [Nickname] screen appears, press the button.

　

2. To use the nickname displayed, press the button.

• Nicknames are 1 – 8 characters and can be changed later. For more information on using the keyboard, please refer to "On-Screen Keyboard".

3. Press the / buttons to choose [ OK ], and then press the button.

　

• If the following screen appears, press the / buttons to switch to other screens.

4. Press the / buttons to choose [ ], then press the button.

5. Press the / buttons to choose [Register a device for connection] , press the button.

　

6. Press the / buttons to choose [Do not display] , press the button.

7. The SSID ( ) and password ( ) will be displayed on the screen.

8. Open [ Settings ] on the iPad, select [ Wi-Fi ] to confirm the SSID is the same as the one displayed on the camera screen, and tap to select.

9. Input the same Password as displayed on the camera ( ) and tap [ Join ] ( ).

10. Go to home screen, and open Camera Connect.

11. Tap [ Canon PowerShot G5 X Mark II ].

12. Confirm that [ Operate the camera to establish a connection ] is displayed.

13. Choose [ OK ] and press the button.

14. [ Wi-Fi on ] will be displayed on the camera screen.

15. Tap [ Images on camera ] .

16. Tap [ Select ].

17. Tap on the imported images to select images.

18. Tap [Digital Photo Professional Express], to choose and tap [ Select ].

19. Select image size, and tap [ OK ].

20. The selected images will be imported into Digital Photo Professional Express.

21. Once the images have been imported, tap [ Open linked app ].

22. Tap [ Yes ].

23. Digital Photo Professional Express will open, tap [ OK ].

24. The imported images will be displayed in the thumbnails screen in Digital Photo Professional Express.

On-Screen Keyboard

	•Entering characters Press the / / / buttons to choose the key of your desired character, and then press the button.
	•Moving the cursor Choose [ ] or [ ] and press the button. You can also move the cursor by turning the ring.
	•Switching input modes Choose [ ], press the button to switch to capital letters. Choose [ ], press the button to switch to numbers or symbols.
	•Deleting characters Choose [ ] and press the button. The previous character will be deleted.
	•Confirming input After pressing the button, press the / buttons to choose [OK], press the button.