ScanGear Starter EX - Adjusting Brightness and Contrast (macOS) - LiDE 120 / LiDE 220

Article ID: ART175541 | Date published: 10/31/2019 | Date last updated: 10/31/2019


This article provides information on adjusting the brightness and contrast of scanned images in ScanGear Starter EX.



Adjusting Brightness and Contrast

You can adjust images that are too dark or bright, or too flat due to lack of contrast by using (Brightness/Contrast) in ScanGear's Advanced Mode tab.



  • Click (Down arrow) to switch to detailed view. Click (Up arrow) to return to the previous view.
  • Click Defaults to reset all adjustments in the current window.


Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel."

Adjust the Red, Green, and Blue combined.

Adjust the Red channel.

Adjust the Green channel.

Adjust the Blue channel.


  • Only Grayscale will be displayed in Channel when Color Mode is Grayscale.


Adjust the image brightness.

Move (Slider) under Brightness to the left to darken and right to brighten the image. You can also enter a value (-127 to 127).

Darkened Original image Brightened


  • Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken the image too much.


"Contrast" is the degree of difference between the brighter and darker parts of an image. Increasing contrast will increase the difference, thus sharpening the image. Decreasing contrast will decrease the difference, thus softening the image.

Move (Slider) under Contrast to the left to decrease and right to increase the contrast of the image. You can also enter a value (-127 to 127).

Decreased contrast Original image Increased contrast


  • Increasing the contrast is effective in adding a three-dimensional feel to soft images. However, shadows and highlights may be lost if you increase the contrast too much.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments