Aligning the Print Head Position Manually from a Windows PC
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
The procedure for performing manual print head alignment is as follows:
Print Head Alignment
-
Open the printer driver setup window.
-
Click Custom Settings on the Maintenance tab.
The Custom Settings dialog box opens.
Note
- If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
-
Check the Align heads manually check box.
-
Click OK and when the confirmation message appears, click OK.
-
Click Print Head Alignment on the Maintenance tab.
The Start Print Head Alignment dialog box opens.
-
Load three sheets of A4 size or Letter size plain paper into the rear tray.
-
Make sure that the printer is on and click Align Print Head.
Follow the instruction in the message.
Important
- Do not open the top cover while printing is in progress.
-
When asked if the patterns printed normally, click Yes.
If the patterns did not print correctly or are blurry, click No and start again.
Check the printed pattern.
Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click OK.
Note
- If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
- If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal streaks.
(A) Least noticeable horizontal streaks
(B) Most noticeable horizontal streaks
-
Confirm the displayed message and click OK.
Click OK.
The second pattern is printed.
Important
- Do not open the top cover while printing is in progress.
-
Check the printed pattern
Enter the numbers of the patterns with the least noticeable horizontal stripes in the associated boxes.
Even if the patterns with the least noticeable horizontal stripes are clicked in the preview window, their numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click OK.
Note
- If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
-
Confirm the displayed message and click OK.
Click OK.
The third pattern is printed.
Important
- Do not open the top cover while printing is in progress.
-
Check the printed pattern.
Enter the numbers of the patterns with the least noticeable horizontal stripes in the associated boxes.
Even if the patterns with the least noticeable horizontal stripes are clicked in the preview window, their numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click OK.
Note
- If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal stripes.
(A) Least noticeable horizontal stripes
(B) Most noticeable horizontal stripes
- Click OK.
Note
- To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print Alignment Value.
