Other dev. settings

Select this menu from Device settings in the Setup menu.
 

• Date/time setting

  Sets the current date and time.
   

  • Setting the Sender Information for Faxing

  
   Important

  • If a power failure occurs or you unplug the power cord, the date/time settings will be reset.
     

• Date display format

  Sets the format of dates displayed on the LCD and printed on sent faxes.
   

• DST setting

  Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.

  You can set your printer to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends.
   

  • Setting the Sender Information for Faxing

  
   Note

  • This setting may not be available depending on the country or region of purchase.
     

• Sound control

  Selects whether the beep sound in operations is enabled or not.
   

  • Keypad volume

    Selects whether the beep sound is enabled or not when pressing the buttons on the operation panel.
     

  • Alarm volume

    Selects whether the alarm is enabled or not.
     

  • Line monitor volume

    Selects whether the line monitor sound is enabled or not.
     

  • Offhook alarm

    Selects whether the alarm is enabled or not when the phone receiver is not put on the hook properly.
     

• Country or region

  Selects the country or region where you are using the printer.

  
   Note

  • This setting may not be available depending on the country or region of purchase.
    

• Key repeat

  Enables / Disables continuous input by pressing and holding down the   buttons when setting the number of copies, the zoom ratio, etc.
   

• Orig. remov. remind.

  Selects whether the printer will display the reminder screen in case you forget to remove the original photo or document from the platen after scanning.

  
   Important

  • Depending on the type of original item on the platen or the state of the document cover, forgetting to remove the original item may not be detected.