Reset settings on the Printer

To reset various settings on your printer, follow the steps below.
 

1. Press the Setup button.
    
2. In the Setup menu, press the right arrow  button until Device settings appears.  Then, press the OK button.
    
3. In the Device settings menu, press the right arrow  button until Reset setting appears.

Depending on your selection, you can return various settings you changed on the printer back to their defaults. However, some settings may not be changed, depending on the current usage state of your printer.

 Important

• Depending on the setting item, it is necessary to perform connection or setup again after you have returned the setting back to the default.

• Web service setup

  Returns the Web service settings back to the default.
   

• LAN settings

  Returns the LAN settings back to the default.
   

• Telephone no. data

  Returns the telephone/fax number settings to default.
   

• Setting data

  Returns the settings such as the paper size, media type, or other setting items other than the network settings or the fax settings back to the default.
   

• Fax settings

  Returns the fax settings back to the default. Disconnect the telephone line from the printer before you return this setting item back to the default.

  After resetting, perform setup again as necessary.
   

• All data

  Sets all settings you made to the printer back to the default. The administrator password specified by Remote UI or IJ Network Device Setup Utility reverts to the default setting.

  After resetting, perform setup again as necessary.

 Note

• You cannot set the following setting items back to the default:
   

  • The language displayed on the LCD
     

  • The current position of the print head
     

  • CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
     

  • The country or region selected for Country or region
     

  You can delete the registered user's name or telephone number following the procedure below.

  1. Display Add unit tel. number or Display Add unit name.
      

     • Setting Sender Information
       
        

  2. Delete all the numbers and the letters by pressing the Back button.
      

  3. Press the OK button after deleting all the numbers and the letters.