Ask a Question

Cannot Send Scanned Documents

Article ID: ART175908 | Date published: 12/13/2019 | Date last updated: 02/19/2020
 

Description

Cannot Send Scanned Documents

Solution

A possible cause may be the wrong send or server settings. Check the following.

413S-03W

Cannot Send Scanned Documents

A possible cause may be the wrong send or server settings. Check the following.
A problem with the connection between the machine and the computer may be another possible cause. Also see the items below.
Cannot Connect to the Network
Cannot Connect to the Network (Wireless LAN Connection)

Is the machine's e-mail address set?

Check whether the e-mail address is set correctly. Configuring E-Mail/I-Fax Communication Settings

Is the destination information specified correctly?

Check whether the destination information is specified correctly. Basic Operations for Scanning Originals

Can e-mail be sent from the computer?

Check whether you can send e-mail using the same mail server as for the machine.

Are the e-mail send settings correct?

Check the basic e-mail send settings. Configuring Basic E-Mail Settings
Use the Remote UI to configure detailed settings for POP authentication before sending or for encrypted communication. Configuring E-Mail/I-Fax Communication Settings

Are the SMTP server or DNS server settings correct?

If no e-mail can be sent, check whether the SMTP server or DNS server are set correctly.
Configuring E-Mail/I-Fax Communication Settings
Configuring DNS

Is the server information such as the password correct?

Check whether the login password and other server information items are registered correctly.
Configuring E-Mail/I-Fax Communication Settings
Registering Destinations from Remote UI

Isn't the data size of attached files too large?

Reduce the data size of files to send via e-mail. Adjusting Balance between File Size and Image Quality (Data Size)

Are the SMB send settings correct?

Check the SMB send settings.
Configuring SMB
Setting a Shared Folder as a Save Location
Sending Data by E-Mail/Saving Data to a Shared Folder or FTP Server
NOTE
Additional settings may be required depending on the network you are using. For more information, contact your Internet service provider or Network Administrator.
To enable TLS for e-mailing. Configuring E-Mail/I-Fax Communication Settings
To change port numbers. Changing Port Numbers


SIMS Doc Id

1576099891

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments