Ask a Question

Afterimages Appear in Blank Areas

Article ID: ART175969 | Date published: 12/13/2019 | Date last updated: 12/24/2019
 

Description

A possible cause may be that appropriate paper is not used or the amount remaining in toner cartridges is running low. Check the following.

Solution

 

A possible cause may be that appropriate paper is not used or the amount remaining in toner cartridges is running low. Check the following.

Are you using appropriate paper?

Check usable paper, and replace with appropriate paper.
Available Paper
Loading Paper

Do ghost images appear in the same page?

Change the setting for <High Humidity Mode>. Setting to <On> may solve the problem. <Adjust Image Quality>
NOTE
If you set to <On>, the print density may vary depending on the ambient humidity.

Do afterimages appear when you print on large size paper after printing on small size paper?

Change the setting for <Reduce Ghosting 1>. Setting to <On> may solve the problem. <Adjust Image Quality>
NOTE
If you set to <On>, the printing speed may be slower.

Is the amount remaining in toner cartridge running low?

Check how much the amount remaining in toner cartridges is left, and replace the toner cartridges as necessary. Replacing the Toner Cartridge
Regardless of the displayed toner level, the toner cartridge may have reached the end of its lifetime due to the machine's environmental conditions and the deteriorated materials in the cartridge. Replace the toner cartridge. Replacing the Toner Cartridge

 

SIMS Doc Id

1576092885

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments