Positioning Originals (Scanning from a Computer) - MB2120 / MB2720
Article ID: ART176093 |
| |
Date published: 01/06/2020 |
| |
Date last updated: 01/17/2020 |
Description
This article shows how to position original items on your MAXIFY MB2120 / MB2720 when scanning from a computer or copying.
Solution
Positioning Originals (Scanning from Computer)
Learn how to place items on the platen glass or ADF (Auto Document Feeder) of your scanner or printer. Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.
Important
-
Do not place objects on the document cover. When you open the document cover, the objects may fall into your scanner or printer, resulting in malfunction.
-
Close the document cover when scanning.
-
Do not touch the operation panel buttons or LCD (Liquid Crystal Display) monitor when opening/closing the document cover. May result in unintended operation.
Placing Items (Platen Glass)
Place items as described below to scan by detecting the item type or size automatically.
Important
-
When scanning by specifying the paper size in IJ Scan Utility or the scanner driver (ScanGear on Windows PCs), align an upper corner of the item with the corner at the arrow (alignment mark) of the platen.
-
Photos that have been cut to various shapes and items smaller than 1.2 inches (3 cm) square cannot be cropped accurately when scanning.
-
Reflective disc labels may not be scanned as expected.
-
When scanned using the scanner driver on macOS, the response may differ. In that case, adjust the cropping frame (selection box) manually.
For Photos, Postcards, Business Cards, or BD/DVD/CD |
For Magazines, Newspapers, or Documents |
Placing a Single Item:
Place the item face-down on the platen, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and the item. Portions placed on the diagonally striped area cannot be scanned.
Important
Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and items, and between items. Portions placed on the diagonally striped area cannot be scanned.
(A) more than 0.4 inch (1 cm)
Note
-
In IJ Scan Utility, you can place up to 12 items.
-
Positions of slanted items (10 degrees or less) are corrected automatically.
|
Place the item face-down on the platen and align an upper corner of the item with the corner at the arrow (alignment mark) of the platen. Portions placed on the diagonally striped area cannot be scanned.
|
Placing Documents (ADF (Auto Document Feeder))
Important
-
Do not leave thick items on the platen glass when scanning from the ADF. This may result in paper jam.
-
Place and align documents of the same size when scanning two or more documents.
-
For supported document sizes when scanning from the ADF, see Supported Originals.
-
Open the document tray.
-
Place the documents on the ADF, then adjust the document guides to the width of the documents.
Insert the documents face-up until a beep sounds.