EOS-1D X Mark III: Setting Image Search Conditions
| Article ID: ART176227 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 09/15/2023 |
Description
Setting Image Search Conditions
Solution
|
Setting Image Search Conditions
Setting Image Search Conditions
You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images.
-
Select [ : Set image search conditions].
-
Set the search conditions.
- Turn the
 dial to select an item.
- Turn the
 dial to set the option.
- A checkmark [
 ] (1) is appended to the left of the item. (Specified as the search condition.)
- If you select the item and press the
 button, the checkmark [] will be removed (which cancels the search condition).
-
Apply the search conditions.
-
Display the found images.
-
Press the button.
Only the images that match the set conditions (filtered) will be played back.
When the images are filtered for display, the screen will have an outer yellow frame (2).
Caution
- If no images match the search conditions,
 cannot be pressed in step 3.
Note
- Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images.
- Auto power off time may be extended while the [: Set image search conditions] screen is displayed.
Clearing the Search Conditions
Access the screen in step 2, then press the  button to clear all the search conditions.
|
