How to adjust White Balance Correction on the EOS 1Dx Mark III.
| Article ID: ART176232 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 02/18/2020 |
Description
How to set white balance correction and white balance auto bracketing on the EOS 1Dx Mark III.
Solution
|
White Balance Correction
White Balance Correction
You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter.
White Balance Correction
-
Select [ : WB Shift/Bkt.].
-
Set the white balance correction.
Sample setting: A2, G1
- Use
 to move the “■” mark on the screen to your preferred position.
- B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark.
- On the right of the screen, [Shift] indicates the direction and correction amount, respectively.
- Pressing the
 button will cancel all the [WB Shift/Bkt.] settings.
- Press
 to exit the setting.
Note
 is displayed on the top LCD panel during white balance correction.- You can set the camera to display
 in the viewfinder to notify you if white balance has been corrected ().
- One level of the blue/amber correction is equivalent to approx. 5 mireds of a color temperature conversion filter. (Mired: Unit of measure for color temperature used to indicate values such as the density of a color temperature conversion filter.)
White Balance Auto Bracketing
White balance bracketing (WB Bkt.) enables you to capture three images at once with different color tones.
Setting the white balance bracketing amount
-
In step 2 for “White Balance Correction”, when you turn the  dial, the “■” mark on the screen will change to “■ ■ ■” (3 points).
Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
B/A bias ±3 levels
- On the right of the screen, [Bracket] indicates the bracketing direction and correction amount.
- Pressing the button will cancel all the [WB Shift/Bkt.] settings.
- Press to exit the setting.
Bracketing sequence
The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
Caution
- During white balance bracketing, the maximum burst for continuous shooting will be lower.
- Since three images are recorded for one shot, it takes longer to record the image to the card.
Note
- You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot.
- The white balance icon blinks to indicate that white balance bracketing has been set.
- You can change the bracketing sequence () and number of shots () for the white balance bracketing.
- Bracket stands for bracketing.
|
