EOS-1D X Mark III: Inserting/Removing Batteries
| Article ID: ART176308 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 09/15/2023 |
Description
Inserting/Removing Batteries
Solution
|
Inserting/Removing Batteries
Inserting/Removing Batteries
Insert a fully charged Battery Pack LP-E19 into the camera.
Viewfinder brightness increases when a battery is inserted and decreases after removal.
Insertion
-
Remove the battery compartment cap.
-
Insert the battery.
- Insert the battery firmly, all the way in, then turn the battery release handle as shown by the arrow.
Caution
- There may be a slight delay before the camera turns on when a battery is used in the camera for the first time.
- You cannot use batteries other than the Battery Pack LP-E19.
Note
-
- Wipe away any dirt on the battery's water-repellent rubber lining (1) with a moistened cotton swab.
Removal
-
Turn the battery release handle and remove the battery.
- Make sure the power switch is set to
 ().
- Flip out the battery release handle, turn it as shown by the arrow, and remove the battery.
- To prevent short-circuits, always attach the included protective cover () to the battery.
- When not using the camera, attach the battery compartment cap ().
|
