WFT-E9: Connecting via WPS (PIN Mode)
| Article ID: ART176418 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 09/15/2023 |
Description
Connecting via WPS (PIN Mode)
Solution
|
Connecting via WPS (PIN Mode)
Connecting via WPS (PIN Mode)
These instructions are continued from Checking the Type of Access Point.
This is a connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a connection.
- Even if there are multiple access points active in the surrounding area, a relatively reliable connection can be established using this shared identification number.
- It may take approx. one minute to establish a connection.
-
Select [Connect with WPS].
-
Select [WPS (PIN mode)].
- Select [OK] to proceed to the next screen.
-
Specify the PIN code.
- At the access point, specify the 8-digit PIN code displayed on the camera's monitor.
- For instructions on setting PIN codes at the access point, refer to the access point's instruction manual.
- After the PIN code is specified, select [OK].
-
Connect to the access point.
- Select [OK] to establish a connection with the access point.
- When a connection with the access point is established, the next screen is displayed.
Go to Setting the IP Address.
|
