WFT-E9: Basic Linked Shooting
Article ID: ART176425 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 09/15/2023 |
Description
Basic Linked Shooting
Solution
Basic Linked Shooting
Basic Linked Shooting
Link the sender camera and the receiver cameras for basic linked shooting.
Preparing the Sender Camera
First, configure settings on the camera that will be used as the sender.
-
Press the button on the camera.
-
Select [: Network settings].
-
Select [Enable].
-
Select [Connection settings].
-
Select [LinkedShot].
- Use and select [LinkedShot] located at the bottom.
-
Select [Create with wizard].
- Select [OK] to proceed to the next screen.
-
Select [Sender].
- Select [OK] to proceed to the next screen.
-
Select [Auto connect].
- Select [OK] to proceed to the next screen.
- Stay on the displayed screen.
- To configure the settings manually, see Using Browser Remote.
Preparing the Receiver Cameras
Configure settings on the camera used as the receiver.
-
Perform Step 1 through 6 for "Preparing the Sender Camera".
-
Select [Receiver].
- Select [OK] to proceed to the next screen.
-
Select [OK].
Connecting the Sender Camera and Receiver Cameras
Configure settings on the sender camera and the receiver camera to establish a connection.
-
Perform Step 1 through 6 for "Preparing the Sender Camera" and Step 1 through 3 for "Preparing the Receiver Cameras".
-
Select [OK] on the sender camera.
- Check the number of receiver cameras that are connected, and then select [OK].
- Once the cameras are connected, the following screen is displayed.
-
Select [OK] on all the cameras.
Sender Camera
Receiver Camera
- The [Network settings] screen will reappear.
- Settings information is stored in the camera. It is not stored in the transmitter.
|