To update the firmware from the operation panel of your printer, follow the steps below.
Note
-
Make sure the printer is turned on and displaying the HOME screen.
If the HOME screen is not displayed, press the HOME button.
-
Select Setup.
The setup menu screen appears.
-
Select Device Settings.
-
Select Firmware update.
-
Select Install update.
-
Select Yes.
-
Select Start update.
The firmware update will begin.
When the update has finished, the printer will turn itself off and then turn on again.
-
Select OK.
If the firmware update did not succeed, make sure that your printer has a strong connection to your network. You can print a network configuration page to check the signal strength of your printer. If the signal strength is low:
-
Move the printer closer to your wireless router
-
Turn off any other wireless devices in use
-
Make sure that you don't have ports in your router blocked
TS8220 Page